AEF is the starting point for ProCurve training. It's a great class, whether you're new to networking or would benefit from a full-coverage review of basic networking, layer 2 technologies and management. For full course details and per-module overview, see the link below.

• Define basic networking technologies for both local and wide area networking and their use in contemporary networks
• Describe the features and appropriate deployments for the switch families in the ProCurve product line
  Use the Command-Line Interface (CLI) to configure and monitor ProCurve switches, routers and access points
• Perform initial configuration tasks for ProCurve switches, routers and access points including the assignment of IP addresses
• Configure and monitor VLANs on ProCurve switches
• Enable high-availability and high-capacity features such as Spanning Tree and link aggregation on ProCurve switches
• Configure a ProCurve Access Point for wireless client connectivity
• Enable traffic prioritization features on ProCurve switches
• Use ProCurve Manager (PCM) and ProCurve Manager Plus (PCM+) to manage a ProCurve network
• Design a network based on ProCurve devices
• Troubleshoot ProCurve devices

Visit ProCurveTraining AEF Course Details for more information
Visit Events page for currently scheduled classes
Register Now
 

Top

RSE is usually the next step after AEF to build a solid networking foundation and incorporate layer 3 technologies into the training experience. In RSE, you'll cover everything from network segmentation and static routing to full dynamic routing and redundant default gateways.

• Device configuration and management
• VLANs and IP interfaces
• Enabling port trunking
• Providing redundant links
• Providing redundant default gateways
• Designing and configuring IP networks
• Configuring OSPF
• Defining and applying ACLs

Visit ProCurveTraining RSE Course Details for more information
Visit Events page for currently scheduled classes
Register Now
 

Top

Network Management with ProCurve Manager (PCM)

Effective network management is key for configuration management, device discovery and management, traffic monitoring and network security. The PCM class covers not only PCM (the free management software included with all ProCurve switches), it also delves into advanced network management with ProCurve Manager Plus (PCM+) as well as the Identity Driven Manager (IDM) and ProCurve Mobility Manager (PMM) add-ins. This training is essential for managing your ProCurve network components.

• Installing and configuring the software
• Overview of the interfaces
• Device management tools and reporting
• Using PCM to manage software updates
• Configuration Manager overview in PCM
• VLAN Manager overview
• Policy Manager & automated configuration management
• Evaluating the network with Traffic Monitor
• Reviewing Events & Alerts
• Extending with Configurable Integration Platform (CIP)
• Using IDM for authorization control, RADIUS integration and 802.1X
• Using PMM to manage wireless devices, radios and configuration

Visit ProCurveTraining PCM Course Details for more information
Visit Events page for currently scheduled classes
Register Now
 

Top

ProCurve Security

The ProCurve Security course covers a variety of security topics, from physical switch security to user authentication using dynamic VLAN assignments from RADIUS with 802.1X. You'll also dip into some IDM (Identity Driven Management) topics, adding additional layers of security with per-user ACLs and granular control.

• ProCurve Security overview
  - Security challenges, Layers of network security, Network security process and framework, Security standards-based foundation, ProCurve ProActive Defense
• ProCurve Device Management Security
  - switch physical security, local passwords, authorized IP managers, RADIUS authentication, SNMPv3, SSH, SSL, Secure Management VLAN
• ProCurve Network Protection
  - Access Control Lists (ACLs), MAC Lockdown, MAC Lockout, ProCurve Port Security, Instrumentation monitor, BPDU filtering and protection, SNMP trap message throttling, DHCP snooping protection, Dynamic ARP protection, Connection-rate filtering, Traffic monitoring
• ProCurve Network Access Control Security
  - 802.1X user authentication, dynamic VLAN assignment, Web-based authentication, MAC-based authentication, Introduction to IDM, Implementing per-user access controls using IDM
• ProCurve Troubleshooting
  - Troubleshooting basics, Information resources and tools, Troubleshooting access control security

ProCurve Network Security Design
- ProCurve security design procedure, Customer infrastructure and software requirements, Network segment layouts and integration, Design scenarios

Visit ProCurveTraining ProCurve Security Course Details for more information
Visit Events page for currently scheduled classes
Register Now
 

Top

ProCurve Mobility

During the ProCurve Mobility course, you'll cover all aspects of the ProCurve wireless family, from traditional heavy APs to the new light AP WESM (Wireless Edge Services) solution using switch-based modules and radio ports. The module overview below doesn't do the course justice, so click on the link below for full ProCurve Mobility Course Details to see a full list of objectives and topics covered.

• ProCurve Mobility Solutions
• Wireless Network Technologies and Specifications
• ProCurve Access Point Family
• ProCurve Wireless LAN System
• Wireless Network Security
• Radio Technologies
• Managing Wireless Networks
• Troubleshooting Wireless Networks
• Designing Wireless Networks

Visit ProCurveTraining ProCurve Mobility Course Details for more information
Visit Events page for currently scheduled classes
Register Now
 

Top

ProCurve Secure Mobility Solutions (SMS)

The Secure Mobility Course isn't for everyone, but it's a great way to dive into designing and managing secure wireless solutions in your environment. Like the Mobility course, the SMS course covers both the traditional heavy APs and the radio port light APs as well as the 700 series solution.

• Understanding Secure Mobility
• Securing a new wireless deployment
• Enhancing existing wireless security
• Using PCM/IDM for access control
• Using the Secure Access 700wl system for access control
• Providing secure guest access

Visit ProCurveTraining Secure Mobility Solutions Course Details for more information
Visit Events page for currently scheduled classes
Register Now
 

Top

ProCurve Convergence

ProCurve Convergence provides experienced network engineers with an opportunity to learn how to use ProCurve switches to support converged applications such as Voice over IP (VoIP) and streaming audio. The course also includes substantial detail on ProCurve support for Quality of Service (QoS) and IPv4 multicast.

• Introducing convergence
• Delivering default QoS
• Customizing QoS behavior
• Understanding IP Multicast
• Configuring IP Multicast

Visit ProCurveTraining ProCurve Convergence Course Details for more information
Visit Events page for currently scheduled classes
Register Now
 

Top

ProCurve Secure WAN

With the ProCurve Secure WAN course, you'll get hands-on training using ProCurve Secure Routers to create T1, E1, and Asymmetric Digital Subscriber Line (ADSL) WAN connections. The course also teaches you how to configure the built-in firewall and optional capabilities, such as Integrated Services Digital Network (ISDN) backup connections and Virtual Private Networks (VPNs).

• Operating the ProCurve Secure Router
• Ethernet Interfaces
• Virtual LANs
• DNS and DHCP
• T1 Interfaces, E1 Interfaces, PPP Interfaces, Frame Relay Interfaces
• MADSL Interfaces, Backup Interfaces
• Routing and Bridging
• ProCurve Secure Router OS Firewall
• Access Control Policies
• Network Address Translation
• Virtual Private Networks
• Quality of Service
• ProCurve VPN Client

Visit ProCurveTraining Secure WAN Course Details for more information
Visit Events page for currently scheduled classes
Register Now
 

Top